Welcome to myHanse.com the forum for Hanse Yachts owners throughout the world. | |
Hatch & Portlight |
Post Reply |
Author | |
jarod159
Lieutenant Joined: 26 September 2017 Status: Offline Points: 33 |
Post Options
Thanks(0)
Posted: 04 August 2018 at 19:46 |
Hello!
I need to change hatch & portlight for my 370 / 2007 Please someone could point me to the right direction to find model/reseller? Thanks a lot
|
|
silversailor
Admiral Joined: 25 May 2005 Location: South Haven, MI Status: Offline Points: 1021 |
Post Options
Thanks(0)
|
All my hatches and portlights are Lewmar.
|
|
Silversailor
South Haven, MI USA S/V Legacy 2010 Andrews 28 |
|
iemand
Admiral Joined: 13 February 2004 Location: Germany Status: Offline Points: 1082 |
Post Options
Thanks(0)
|
Which hatches / portlights
Which model year? |
|
Hanse 312 MJ 2004 - Hanse 370e MJ 2007
|
|
Julien
Lieutenant Joined: 18 January 2019 Status: Offline Points: 24 |
Post Options
Thanks(0)
|
Hi, I am interested too. I already have an eclipse roller shade on my carre hatch and i want the same for my cabin. But i don't know which part i have to buy. I have Lewmar product and i think the size of both hatches is T60. Does someone have already buy eclipse roller shade or know informations about products ? Best Julien
|
|
Heikki
Commander Joined: 15 November 2014 Location: France Status: Offline Points: 82 |
Post Options
Thanks(0)
|
Hi, I am looking for new acrylics to my Lewmar hatches. Both of them are Sz 60 but I don't know if they are low profile or medium profile. The difference is that low profile has 10 mm acrylic and medium profile 12 mm. I have a Hanse 400e from 2006, but the hatches are the same on 370. Does anybody know which one is the right profile? Regards, Heikki
|
|
Melanie
Hanse 400e #121 |
|
MarcoC
Admiral Joined: 23 April 2009 Location: Sweden, Stockh. Status: Offline Points: 1617 |
Post Options
Thanks(0)
|
Do you have pictures on the ones you need t change?
Have you looked at the product number etched in the acrylic? Regarding roof/ceilng/deck hatches you should go with the new Lewmar ones that do not have the aluminium frame on the inside as it will detach later or sooner due to the glue deteriorating from UV light. |
|
"Älva"
Hanse 370#671 Stockholm, Sweden www.wesailhanse.se big wheel, deep draught iron keel, 3 cabins,Yanmar 3JH4E, Sparcraft rig. |
|
Heikki
Commander Joined: 15 November 2014 Location: France Status: Offline Points: 82 |
Post Options
Thanks(0)
|
Hi MarcoC, Here is the photo of my hatch. My boat is in Finland and I am in France unable to have a closer look at the hatch, so my son went there to make measurements. He could not find any identification number in the acrylic, but according to his measurements the height of hatch is around 25 mm. This is much less than the given height to medium profile hatch (32 mm). So I believe, it is a low profile hatch. Regards, Heikki
|
|
Melanie
Hanse 400e #121 |
|
Peter Russell
Commadore Joined: 24 October 2007 Location: Wiltshire Status: Offline Points: 430 |
Post Options
Thanks(0)
|
Hi I'm on board my 2008 370 at the moment. I have a flush fore hatch so can't help there and I checked my main cabin hatch, but there are no markings on it. It looks like you can get the acrylic out as the rim has 4 screws clamping it together which I guess gives enough space, once undone, to slip the acrylic out.
You should them be able to get to a local sign maker and get them to cut one to size. I'm assuming it does not need polished edges so should be a quick process. I think the risk is that the screws don't come out and you need to replace the whole hatch! |
|
Post Reply | |
Tweet |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
Links : www.hanseyachts.co.uk www.hanseyachts.com www.fjordboats.co.uk www.dehler.co.uk www.varianta.co.uk |