Welcome to myHanse.com the forum for Hanse Yachts owners throughout the world.
|
|
Welcome to myHanse.com the forum for Hanse Yachts owners throughout the world. |
 Active Topics  Memberlist  Calendar  Search  Help |
|
 Register  Login |
| 320 | |
 myHanse - Hanse Yachts Owners Forum : Hints and Tips : 320 |
 Topic: 105% Jib |
  |
| << Prev Page of 4 Next >> |
| Author | Message |
|
coriolis2
Commander 
Joined: 06 January 2008 Location: Netherlands Online Status: Offline Posts: 134 |
   Posted: 09 February 2010 at 16:44 |
|
Gran Onada, w.r.t. to your question, I'd asked Gaastra Sails for price ranges, they replied with a complete price list for Hanse.
They measured a 350 (our boat) and a 320, don't know about the rest. Regards, Rob Hanse 320 DynamiX CAL Pentex Main 28,47 m² - € 2.650,00 incl. BTW excl. 15% Hanse deal discount HighAspect 22,87 m² - € 1.670,00 incl. BTW excl. 15% Hanse deal discount Hanse 350 DynamiX CAL Pentex Main 35,25 m² - € 3.280,00 incl. BTW excl. 15% Hanse deal discount HighAspect 29,61 m² - € 2.160,00 incl. BTW excl. 15% Hanse deal discount Hanse 375 DynamiX CAL Pentex Main 42,5 m² - € 3.955,00 incl. BTW excl. 15% Hanse deal discount HighAspect 28,6 m² - € 2.090,00 incl. BTW excl. 15% Hanse deal discount Hanse 400 DynamiX CAL Vectran Main 52,2 m² - € 5.690,00 incl. BTW excl. 15% Hanse deal discount HighAspect 36,2 m² - € 2.935,00 incl. BTW excl. 15% Hanse deal discount Hanse 430 DynamiX CAL Vectran Main 63 m² - € 6.870,00 incl. BTW excl. 15% Hanse deal discount HighAspect 39,00 m² - € 3.160,00 incl. BTW excl. 15% Hanse deal discount Hanse 470 DynamiX CAL Vectran Main 67,5 m² - € 7.360,00 incl. BTW excl. 15% Hanse deal discount HighAspect 48,3 m² - € 3.915,00 incl. BTW excl. 15% Hanse deal discount Hanse 545 DynamiX CAL Vectran Main 85,1 m² - € 9.280,00 incl. BTW excl. 15% Hanse deal discount HighAspect 58,00 m² - € 4.695,00 incl. BTW excl. 15% Hanse deal discount Hanse 630e DynamiX CAL Vectran Main 118,20 m² - € 12.885,00 incl. BTW excl. 15% Hanse deal discount HighAspect 81,91 m² - € 6.635,00 incl. BTW excl. 15% Hanse deal discount Main 2 full battens, 2 reefs, loose shelf foot, HA vertical battens & UV protection |
|
|
"Coriolis" H350 #045 (ex Waarschip 570 #? 1987/1992, ex Waarschip 28LD #7 1994/2007)
|
|
 IP Logged |
|
|
Gran Onada
Commander
Joined: 14 November 2008 Location: Spain Online Status: Offline Posts: 89 |
Posted: 09 February 2010 at 21:47 |
|
Originally posted by coriolis2
Thanks for this complete info.
Gran Onada, w.r.t. to your question, I'd asked Gaastra Sails for price ranges, they replied with a complete price list for Hanse. They measured a 350 (our boat) and a 320, don't know about the rest. Regards, Rob Hanse 320 DynamiX CAL Pentex Main 28,47 m² - € 2.650,00 incl. BTW excl. 15% Hanse deal discount HighAspect 22,87 m² - € 1.670,00 incl. BTW excl. 15% Hanse deal discount Hanse 350 DynamiX CAL Pentex Main 35,25 m² - € 3.280,00 incl. BTW excl. 15% Hanse deal discount HighAspect 29,61 m² - € 2.160,00 incl. BTW excl. 15% Hanse deal discount Hanse 375 DynamiX CAL Pentex Main 42,5 m² - € 3.955,00 incl. BTW excl. 15% Hanse deal discount HighAspect 28,6 m² - € 2.090,00 incl. BTW excl. 15% Hanse deal discount Hanse 400 DynamiX CAL Vectran Main 52,2 m² - € 5.690,00 incl. BTW excl. 15% Hanse deal discount HighAspect 36,2 m² - € 2.935,00 incl. BTW excl. 15% Hanse deal discount Hanse 430 DynamiX CAL Vectran Main 63 m² - € 6.870,00 incl. BTW excl. 15% Hanse deal discount HighAspect 39,00 m² - € 3.160,00 incl. BTW excl. 15% Hanse deal discount Hanse 470 DynamiX CAL Vectran Main 67,5 m² - € 7.360,00 incl. BTW excl. 15% Hanse deal discount HighAspect 48,3 m² - € 3.915,00 incl. BTW excl. 15% Hanse deal discount Hanse 545 DynamiX CAL Vectran Main 85,1 m² - € 9.280,00 incl. BTW excl. 15% Hanse deal discount HighAspect 58,00 m² - € 4.695,00 incl. BTW excl. 15% Hanse deal discount Hanse 630e DynamiX CAL Vectran Main 118,20 m² - € 12.885,00 incl. BTW excl. 15% Hanse deal discount HighAspect 81,91 m² - € 6.635,00 incl. BTW excl. 15% Hanse deal discount Main 2 full battens, 2 reefs, loose shelf foot, HA vertical battens & UV protection I will check with the local sail makers and see what kind of quotes Iget from them.
|
|
|
Gran Onada IV - Hanse 350 #130
|
|
|
IP Logged |
|
|
shaukaas
Captain 
Joined: 04 August 2008 Online Status: Offline Posts: 169 |
Posted: 16 February 2010 at 10:20 |
|
Does anyone based in the UK have any recommendations on where to buy deck hardware - such as Genoa cars... ? As far as I've been able to find out it's half the price from Norway for a set of Genoa cars from Lewmar...
|
|
|
S/Y Nadun - Hanse 320#171
LG3600 - NOR13510 |
|
|
IP Logged |
|
|
Windsurfer
Captain
Joined: 07 April 2010 Location: Russian Federation Online Status: Offline Posts: 191 |
Posted: 28 July 2010 at 10:50 |
|
Shaukaas have you already installed the genoa cars??? Is it a standard plunger-type 29441700... or different with some kind of blocks to make it adjustable from cockpit...if so how did you lead the sheets to the cockpit???
|
|
|
Hanse 320 #079
|
|
|
IP Logged |
|
|
shaukaas
Captain
Joined: 04 August 2008 Online Status: Offline Posts: 169 |
Posted: 28 July 2010 at 14:39 |
|
I bought the standard plunger cars; removed the bolt/pin and installed shieves on the car itself. The lines are led to a camcleat on each side, just beside the rear storage lockers.
|
|
|
S/Y Nadun - Hanse 320#171
LG3600 - NOR13510 |
|
|
IP Logged |
|
|
Raptor
Lieutenant Commander 
Joined: 28 August 2009 Online Status: Offline Posts: 66 |
Posted: 28 July 2010 at 14:48 |
|
any bright ideas on how to "repair" the innerliner after cutting it to place the reinforced backplate? what abt one of these inspection hatches? not that nice to look at but less work i would assume. also the bolts/nuts will then be accessable for the future.
another question. would you be able to send me the drawings for cutting the pom sheaves?
|
|
|
IP Logged |
|
|
shaukaas
Captain
Joined: 04 August 2008 Online Status: Offline Posts: 169 |
Posted: 28 July 2010 at 15:02 |
|
My "idea" consists of a thin plywood with some white leather look-a-like (same stuff that Hanse put in the ceiling) - either attached with screws or velcro.
I have still not finished up after my vandalism of the interior; another winter project, I guess...  Please send me your e-mail on a PM for the drawings. |
|
|
S/Y Nadun - Hanse 320#171
LG3600 - NOR13510 |
|
|
IP Logged |
|
|
Windsurfer
Captain
Joined: 07 April 2010 Location: Russian Federation Online Status: Offline Posts: 191 |
Posted: 28 July 2010 at 21:03 |
|
So you got the above mentioned cars and ordered the sheaves separately??? What particular number??? Is it a single control line sheave - P/n #29471011??? Do you have a pair of double clutches on port and starboard side on the decks? Or there's a small cleat used for the genoa track adjustment and a single clutch for the sheets??? You photos would be a really big help here...when you send the photos to Raptor please do not forget me as well - alexshubnyakov@mail.ru
Many thanks in advance.. |
|
|
Hanse 320 #079
|
|
|
IP Logged |
|
|
shaukaas
Captain
Joined: 04 August 2008 Online Status: Offline Posts: 169 |
Posted: 29 July 2010 at 11:32 |
|
I bought the following from marine.com
(Lewmar Partnumber in brackets) 2 x Lewmar - End stop w/Sng CL shv&bckt (29471035) 1 x Lewmar - Sng CL shv assy (Pair) for end stop (29471011) 1 x Lewmar - SR Car Genoa Stirrup Plunger stop Port (29441720) 1 x Lewmar - SR Car Genoa stirrup Plunger stop Stbd (29441730) 2 x Lewmar - 72mm Synchro Jamming Footblock(Sz 2) (29927264) 2 x Harken - Micro Aluminum Cam Cleat w/Reversible Fairlead (H389) Some customization had to be performed to mount the shieves on the genoa cars. |
|
|
S/Y Nadun - Hanse 320#171
LG3600 - NOR13510 |
|
|
IP Logged |
|
|
Windsurfer
Captain
Joined: 07 April 2010 Location: Russian Federation Online Status: Offline Posts: 191 |
Posted: 30 July 2010 at 16:14 |
|
Thanks a lot for the information (as well as the drawing) Stian. I appreciate it...I have also checked out your pictures on the "Genoatracks" thread...very helpfull...(I still wonder why you think it's unnecessary to post pictures - it's a great help to all of us!)
 I can now see that you've done a lot of work - lots of drilling, customization, reinforcement etc... you're right - hanse should have done it beforehand for us... I have some comments and further questions if you don't mind... 1. What does it mean Jamming footblock??? does this type of block actually jamm the rope like a camcleat or it works like a ratchet block??? 2. If it doesn't actually jamm completely - maybe there's a solution to install double cheek blocks and lead both lines to the winch?? 3. Do you think there can be a possibility to install double clutch on side decks instead of those camcleats to really be able to coveniently jamm both lines at the same time and then lead them through double cheek blocks to the winch??? As far as I remember you have substituted the double cluthes with triple ones so they're unused...why not to install them on side decks??? 4. Don't you think the angle of sheeting line guided to the winch by the footblock is a bit exagerated...does it work smoothly that way??? It appears from your picture that the Lewmar cheek block is a little bit too low and doesn't guide the sheeting line at the right angle to the winch...maybe it's a false impression...if you say that it works perfectly - there's no further doubts... Edited by Windsurfer - 30 July 2010 at 16:15 |
|
|
Hanse 320 #079
|
|
|
IP Logged |
|
| << Prev Page of 4 Next >> |
| |
||
Forum Jump |
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
|
|
Links : www.hanseyachts.co.uk www.hanseyachts.com www.fjordboats.co.uk www.hansedownunder.com.au www.cobaltboatsuk.com |
