388 Rudder Wobble

I clipped a rock and now the rudder has moved up and rubs against the hull. I can see that a white plastic ring has cracked and there is some movement in the rudder.

Next month I am going to pull it out of the water to replace the plastic ring and possibly service the bearings and check for damage.

From looking at the drawings provided by Jeffa is looks like the 388 is fitted with a fixed roller bearing but in the video I found on the net shows a removable self-alligning bearing. So I am confused which one is correct?

Does anyone know which one would be fitted and possibly the part number? 

Thanks

We dropped the rudder slightly for maintenance to add some sealant to hull join as recommended but noticed the lower bearing had a crack in white plastic bearing. No vibration or symptoms but replaced bearing anyway to be on safeside.

It took a couple of hours and was pretty straightforward job.

If you hit a rock I would also check for any other damage to be safe.

This was on my 418 

The video 'Jefa Rudder and bearing service' below is the one I found very useful and helped me through the process of dropping the rudder.

Good luck.