AGM's replaced by LiFePo4's

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

Thank you. 
I firstly mounted on the recommended 
minus contact of the generater. Then I placed the sensor on the hottest 
point (as you did) with a hose clamp. 
Even changed the 
sensor by the spare that I did not use for battery emperatur control to 
be sure the sensor is working. Checked the contacts on the very tiny 
clamps inside the charger.
Additional added a blower to increase ventilation.
Resuslts to 120°C. 
The A2B Charger is set by Programm "9" for LiFePO4. 
I will study again the other threads.

This forum is extremely helpful. Amazing. Thanks all!

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
Käpt´n Nuß Members Profile Send Private Message Find Members Posts Add to Buddy List Sub Lieutenant Joined: 17 December 2020 Location: Germany Status: Offline Points: 15	Post Options Post Reply Quote Käpt´n Nuß Report Post Thanks(0) Quote Reply Posted: 18 August 2021 at 22:08
	Thank you. I firstly mounted on the recommended minus contact of the generater. Then I placed the sensor on the hottest point (as you did) with a hose clamp. Even changed the sensor by the spare that I did not use for battery emperatur control to be sure the sensor is working. Checked the contacts on the very tiny clamps inside the charger. Additional added a blower to increase ventilation. Resuslts to 120°C. The A2B Charger is set by Programm "9" for LiFePO4. I will study again the other threads. This forum is extremely helpful. Amazing. Thanks all!
	SY Yggdrasil Wackerballig



Welcome to myHanse.com the forum for Hanse Yachts owners throughout the world.