myHanse.com - Hanse Yacht Owners Website myHanse.com - Hanse Yacht Owners Website myHanse.com - Hanse Yacht Owners Website myHanse.com - Hanse Yacht Owners Website

Welcome to myHanse.com the forum for Hanse Yachts owners throughout the world.

Forum Home Forum Home > Hints and Tips > 385/388
  New Posts New Posts RSS Feed - Anchor roller
  FAQ FAQ  Forum Search   Events   Register Register  Login Login

Anchor roller

 Post Reply Post Reply
Author
Message
Perola View Drop Down
Sub Lieutenant
Sub Lieutenant
Avatar

Joined: 06 June 2021
Location: Us
Status: Offline
Points: 4
Post Options Post Options   Thanks (0) Thanks(0)   Quote Perola Quote  Post ReplyReply Direct Link To This Post Topic: Anchor roller
    Posted: 02 May 2022 at 11:27
Hello- The nut end of the bolt that holds the anchor rollers in place has come loose and has been lost. I have not been able to find a replacement. Has anyone had a similar problem and found a solution? Many thanks.
Back to Top
S&J View Drop Down
Vice Admiral
Vice Admiral
Avatar

Joined: 30 August 2014
Location: Perth WA / Med
Status: Offline
Points: 932
Post Options Post Options   Thanks (0) Thanks(0)   Quote S&J Quote  Post ReplyReply Direct Link To This Post Posted: 02 May 2022 at 12:20
I had this problem last year but I also lost the pin.  I had to source replacements from the UK dealer.  Ordered them in August and only just received (partly due to my own nomadic existence).
If you still have the pin and roller you should be able to find a suitable bolt and washer to replace the one you have lost.  It requires a countersunk headed bolt and cup washer, not sure of the size or length but if you only lost one you'll be able to measure the other side.

I recommend using loctite when refitting.

I was fortunate that I have the double roller on my boat. The pin was lost while anchoring and I had to hang over the bow in a bosun's chair and swap the pin and roller from the port side to starboard where and anchor/windlass was. 
H458 #159 Primal Mediterranean cruising
Back to Top
Bruno View Drop Down
Commander
Commander


Joined: 13 August 2014
Location: Bromont, Quebec
Status: Offline
Points: 99
Post Options Post Options   Thanks (0) Thanks(0)   Quote Bruno Quote  Post ReplyReply Direct Link To This Post Posted: 20 September 2022 at 16:52
Hello,

I have lost a bolt of my single anchor roller. Were you able to find the replacement bolt? I am looking for the length and size. I can read A4-70 on the other bolt. To remove the roller, I must be able to block it with a bolt to unscrew the centre threaded pin.
Bruno

Hanse 400, 2010 Hull 660, Canadian flag sailing Lake Champlain, VT USA
Back to Top
Captain Cook View Drop Down
Vice Admiral
Vice Admiral
Avatar

Joined: 23 May 2006
Location: Denmark
Status: Offline
Points: 778
Post Options Post Options   Thanks (0) Thanks(0)   Quote Captain Cook Quote  Post ReplyReply Direct Link To This Post Posted: 20 September 2022 at 22:34
When I lost my bolt, I bought a A4 bolt, something like 10-12mm and lenght like 100-120mm. Then I drilled a small hole in the end for the split pin. Has worked for 10 years.
Freya H400 #27 (2006), 40HP 3JH4E, 2-cabin, 3-blade Flexofold, Aries LiftUp Windvane, Exturn 300, Jefa DD1,Simrad NX40,Icom M603(VHF)+M802(SSB)
Back to Top
 Post Reply Post Reply
  Share Topic   

Forum Jump Forum Permissions View Drop Down

Forum Software by Web Wiz Forums® version 12.01
Copyright ©2001-2018 Web Wiz Ltd.

This page was generated in 0.063 seconds.

Links : www.hanseyachts.co.uk www.hanseyachts.com www.fjordboats.co.uk www.dehler.co.uk www.varianta.co.uk