Squeekie floor boards..what to do?

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Well in any case it is fixed now, at least on my Pauline, tks to my father in law's brilliant idea.

Image 1 shows the concerned zone before we did the job (you can see that Hanse yard's vacuum cleaners were out of order when they mounted the floor).

I glued the plastic hook that you see on the left side of the head door, to hold the vertical sliding hatch; unfortunately there's no clever storage in the 345 like what you can find in the 415 or Dehlers. I'll post something more in another thread.

Image 2 and 3 show the wooden board with adjustable plastic stands that we fitted

Now silence rules again ...

Cheers,

Maurizio

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
Silver Members Profile Send Private Message Find Members Posts Add to Buddy List Lieutenant Joined: 19 March 2013 Location: Italy Status: Offline Points: 26	Post Options Post Reply Quote Silver Report Post Thanks(0) Quote Reply Posted: 19 September 2013 at 20:52
	Well in any case it is fixed now, at least on my Pauline, tks to my father in law's brilliant idea. Image 1 shows the concerned zone before we did the job (you can see that Hanse yard's vacuum cleaners were out of order when they mounted the floor). I glued the plastic hook that you see on the left side of the head door, to hold the vertical sliding hatch; unfortunately there's no clever storage in the 345 like what you can find in the 415 or Dehlers. I'll post something more in another thread. Image 2 and 3 show the wooden board with adjustable plastic stands that we fitted Now silence rules again ... Cheers, Maurizio
	Hanse 345 # 51 Performance sails Volvo D1-30 KiwiProp Coppercoat

E51WET Members Profile Send Private Message Find Members Posts Add to Buddy List Sub Lieutenant Joined: 06 July 2016 Location: Sweden Status: Offline Points: 10	Post Options Post Reply Quote E51WET Report Post Thanks(0) Quote Reply Posted: 08 July 2016 at 07:36
	Something that works on many boats is to put rubber or leather on the edges. First try to glue leather strips around the edges of the lower part (hull). Put back your floor board and see if it helps. If it did, remove the floor board and mill out on the edges enough to fit the thickness of the leather in order to get your floor board to have the same height again. Leather is usually better than rubber as it don’t deteroate after some years. Also it is a living material adapting to different environments you may be in. Done!

Nerthuz Members Profile Send Private Message Find Members Posts Add to Buddy List Lieutenant Commander Joined: 25 December 2011 Location: Oslo, Norway Status: Offline Points: 67	Post Options Post Reply Quote Nerthuz Report Post Thanks(0) Quote Reply Posted: 10 July 2016 at 20:23
	Hi Your dealer should fix this problem, which is quite common on new Hanse boats, from my experience.



Welcome to myHanse.com the forum for Hanse Yachts owners throughout the world.