Hanse 430 anodes specifications

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Hi I'm a new owner of a H430 and will for the first time apply antifouling and replace anodes. The boat is currently in the water and will be lifted only for a short time on land.
Does anyone have the anode specification for the H430? The boat is standard equipped with the Yanmar 50hk, SD 50 and the Max Power bow thruster.
Thank you very much in advance!
Cheers
Patrik

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
H64 Members Profile Send Private Message Find Members Posts Add to Buddy List Lieutenant Joined: 22 September 2019 Location: Sweden Status: Offline Points: 24	Post Options Post Reply Quote H64 Report Post Thanks(0) Quote Reply Topic: Hanse 430 anodes specifications Posted: 10 May 2021 at 09:18
	Hi I'm a new owner of a H430 and will for the first time apply antifouling and replace anodes. The boat is currently in the water and will be lifted only for a short time on land. Does anyone have the anode specification for the H430? The boat is standard equipped with the Yanmar 50hk, SD 50 and the Max Power bow thruster. Thank you very much in advance! Cheers Patrik

Dogscout Members Profile Send Private Message Find Members Posts Add to Buddy List Captain Joined: 10 July 2017 Location: Wandering About Status: Offline Points: 207	Post Options Post Reply Quote Dogscout Report Post Thanks(0) Quote Reply Posted: 12 May 2021 at 12:13
	So the SD 50 anode is a standard Yanmar part, and typically the propeller has one or more anode that is dependent on the propeller brand. I have a Gori 3 blade which there are two specific anodes for Gori and I also changed the Yanmar anode to a split one that I could change without removing the prop. There is another anode on the hull near the galley sink drain thruhull. If you look under the galley sink you will see the bolt studs that hold it in place on the outside of the hull. Measure the studs and find a flat bar anode with the size and spacing you have. I do not recall if there is one on the rudder. You really need to know what Prop you have.
	Adventure awaits

Lykke Members Profile Send Private Message Find Members Posts Add to Buddy List Lieutenant Commander Joined: 07 January 2016 Location: Norway Status: Offline Points: 70	Post Options Post Reply Quote Lykke Report Post Thanks(0) Quote Reply Posted: 12 May 2021 at 23:11
	These are my anodes. I Have changed the one between the propeller and the saildrive to a split one so I do not need to remove the propeller to change it. There are no other anodes on my boat. What I have near the galley sink outlet is a porous copper grounding plate.
	Lykke, Hanse 430e, #8 from 2007



Welcome to myHanse.com the forum for Hanse Yachts owners throughout the world.