Welcome to myHanse.com the forum for Hanse Yachts owners throughout the world. | |
Navigationlight SN |
Post Reply |
Author | |
WillemVela
Sub Lieutenant Joined: 29 March 2020 Location: Rotterdam Status: Offline Points: 2 |
Post Options
Thanks(0)
Posted: 29 March 2020 at 08:45 |
Where to find fuse for SB light.
At the panelswitch lamp indicator doesn’t work. Tnx
|
|
Captain Cook
Admiral Joined: 23 May 2006 Location: Denmark Status: Offline Points: 1009 |
Post Options
Thanks(0)
|
All three nav lights (red/green/white) have the same automatic fuse on the Calira panel, which is no. 3 from the top in the left hand column on Johans photo below. If only the SB light is out, you will have to search for a reason elsewhere. Look at www.wesailhanse.se for a cable diagram. Edited by Captain Cook - 29 March 2020 at 15:31 |
|
Freya H400 #27 (2006), 40HP 3JH4E, 2-cabin, 3-blade Flexofold, Aries LiftUp Windvane, Exturn 300, Jefa DD1,Simrad NX40,Icom M603(VHF)+M802(SSB)
|
|
Peter Russell
Commadore Joined: 24 October 2007 Location: Wiltshire Status: Offline Points: 430 |
Post Options
Thanks(0)
|
Based on my experience from my 370, if the light is not working then there is probably salt water down the cable. They did not use marine cable - just standard automotive cable so the chances are it has failed. If that is the case then there is some advice on here (expand the search back a few years) as to how to run new cable.
|
|
Rikard_Swe
Lieutenant Commander Joined: 05 August 2019 Location: Stockholm Status: Offline Points: 69 |
Post Options
Thanks(0)
|
My SB light just died aswell. I was about to look into making a hole from the anchor locker to see if I can find the wires.
Has anyone here had the same problem and solved it? In that case - what was the easiest way? :) |
|
Bruno
Commander Joined: 13 August 2014 Location: Bromont, Quebec Status: Offline Points: 104 |
Post Options
Thanks(0)
|
I had the same problem last year. I removed the lense and verified if I had any current at the bulb, which I didn't. I pulled out enough wire from the pulpit and checked if I had current from the panel, which I did. I replaced the complete light and it solved the problem.
|
|
Bruno
Hanse 400, 2010 Hull 660, Canadian flag sailing Lake Champlain, VT USA |
|
Sportswagoneer
Lieutenant Commander Joined: 17 June 2018 Location: Norway Status: Offline Points: 51 |
Post Options
Thanks(0)
|
Where did you connect the cable?
I have found a suitable Aquasignal replacement light (Series 34 - a little different but fits the mounting bracket 50mm screw distance). It comes with a 1.4m soldered wire - so I'd like to be able to connect it somewhere more sheltered than the back of the bracket... There's an inspection hatch in front of my thruster that I haven't opened yet. Was hoping for the wire connection to be there so I could pull the new wire down with the old one... Edited by Sportswagoneer - 30 April 2020 at 17:48 |
|
Bruno
Commander Joined: 13 August 2014 Location: Bromont, Quebec Status: Offline Points: 104 |
Post Options
Thanks(0)
|
I simply connected the wires together, covered by a shrink tube and wrapped nicely around the bracket.
|
|
Bruno
Hanse 400, 2010 Hull 660, Canadian flag sailing Lake Champlain, VT USA |
|
Post Reply | |
Tweet |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
Links : www.hanseyachts.co.uk www.hanseyachts.com www.fjordboats.co.uk www.dehler.co.uk www.varianta.co.uk |