Welcome to myHanse.com the forum for Hanse Yachts owners throughout the world. | |
Running Rigging |
Post Reply |
Author | |
MikeMeer
Sub Lieutenant Joined: 23 January 2013 Location: Annapolis, MD Status: Offline Points: 15 |
Post Options
Thanks(0)
Posted: 23 January 2013 at 16:29 |
I am a rigger in Annapolis commissioning a new 545. Can someone tell me the running rigging layout for the rope clutches in the cockpit? I am confused because the exits in the mast don't line up with what I think would be the higher loaded lines to the larger XX clutches.
Any Help is appreciated. We are also doing work customizing the electronics, the galley and installing additional electric heads. I'm happy to offer advice if you need on your projects. mike@southboundcruising.com |
|
Mike-
mike@southboundcruising.com |
|
Wild
Vice Admiral Joined: 18 March 2010 Location: Turkey-Greece Status: Offline Points: 784 |
Post Options
Thanks(0)
|
Hello Mike,
this is how we did it finaly after a few changes.
The 2 XX clutches are both for the Dyneema halyards, main and gib.
Port side from outside to inside:halyard main(XX0812), spi halyard,reef 2 front,reef 1 back,sheet main,outhaul main.
Star side from outside to inside :toppinglift,sheet gib,halyard gib(XX8012),reef 1 front,reef 2 back,rodkicker-boomvang
Hope this will help you
|
|
Wild and Wet
Belgium 545e#268 |
|
Swanji
Captain Joined: 28 March 2012 Location: Greece Status: Offline Points: 348 |
Post Options
Thanks(0)
|
Hello Wild
So if I can still count that means you have 6 clutches on each side. That would be useful. We have 5 on starboard and 4 on port. Another upgrade this year is to add another clutch on port as there is space for one more. We will then not have to share the spinnaker halyard and the Cunningham on one clutch. One more clutch and we would be able to have the topping lift lead back to the cockpit as well. There is always something isn't there I notice also that you seem to have done away with single line reefing . Edited by Swanji - 24 January 2013 at 06:32 |
|
Onwards and upwards
Nidri, Levkada, Ionian, Greece Hanse 350 #7, SY Evolution, standard keel, 3YM20 sail drive, 3 cabins, cherry wood interior, teak decks, feathering prop |
|
sailmansail
Sub Lieutenant Joined: 24 September 2010 Location: Turkey Status: Offline Points: 16 |
Post Options
Thanks(0)
|
Hello Do you have Hanse 545 (2011) ropes measurments (for sails)
Halyards for mains sail and self tacking jib 1st reef, 2nd reef ropes (how many meters) Maain Sheet ropes (how many meters) Boom Vang rope (how many meters) Topping lift rope (how many meters) Thank you |
|
Post Reply | |
Tweet |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
Links : www.hanseyachts.co.uk www.hanseyachts.com www.fjordboats.co.uk www.dehler.co.uk www.varianta.co.uk |