Print Page | Close Window

345 cable duct plan

Printed From: myHanse.com
Category: Hints & Tips
Forum Name: 345/348
Forum Description: 345/348 Hints, Tips and News
URL: https://www.myhanse.com/forum_posts.asp?TID=10611
Printed Date: 27 March 2026 at 03:30
Software Version: Web Wiz Forums 12.06 - https://www.webwizforums.com


Topic: 345 cable duct plan
Posted By: Fendant
Subject: 345 cable duct plan
Date Posted: 29 January 2018 at 17:59
I am planning to install a 1500 W Inverter instead of the factory fitted Little 350 W one.
I want to install a separate 220 V plug in the pantry/forecabin. Does anybody have a plan for the cable ducts ? I Need to rout the 220 V cable from the battery compartment over to the other side.
Thx in advance for your help!


-------------
Frank



Replies:
Posted By: Captain Cook
Date Posted: 29 January 2018 at 18:54
Hi Frank
In my 400 there is a cable duct from the battery-charger to a grounding-plate under the pantry, but the brave workmen at Hanse Werft have made sharp bends in the ducts, so I had to place a new one instead. (And new ones to the stern of the ship also).  I did use a search-spring to help the cables through the ducts. Do remember, that it is not allowed to work with high-voltage 230V for a layman.  If you do the job yourself, remember to fasten the cable every 15 cm, and mount rubber-eyes where the cable may be damaged. Do use a solid cable of at least 1.5 mm2, with ground-wire.


-------------
Freya H400 #27 (2006),2-cabin, 40HP 3JH4E, 3-blade Flexofold, Aries LiftUp Windvane, Exturn 300, Jefa DD1,Simrad NX40,Icom M603(VHF)+M802(SSB)



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.06 - https://www.webwizforums.com
Copyright ©2001-2023 Web Wiz Ltd. - https://www.webwiz.net