Print Page | Close Window

Radar scanner cable

Printed From: myHanse.com
Category: Hints & Tips
Forum Name: 400
Forum Description: 400 Hints, Tips and News
URL: https://www.myhanse.com/forum_posts.asp?TID=10810
Printed Date: 27 March 2026 at 03:41
Software Version: Web Wiz Forums 12.06 - https://www.webwizforums.com


Topic: Radar scanner cable
Posted By: Heikki
Subject: Radar scanner cable
Date Posted: 03 June 2018 at 15:27
Hi,

I am unstepping the mast of my Hanse 400e, year 2006. The radar scanner cable seems to continue all the way from the mast attached radar scanner to the CX 34 display unit. It seems very difficult to take the cable all the way out and then back when stepping the mast again. Is there a hidden connector somewhere to make things easier or do I just have to cut the cable and install a connector close to the swan neck?

Regards,
Heikki


-------------
Melanie
Hanse 400e #121



Replies:
Posted By: Captain Cook
Date Posted: 06 June 2018 at 08:40
Normally the cables to the mast are split up under the swan neck, but if it is not the case with the radar cable, it is no big deal to cut it like in this photo from a older post.



-------------
Freya H400 #27 (2006),2-cabin, 40HP 3JH4E, 3-blade Flexofold, Aries LiftUp Windvane, Exturn 300, Jefa DD1,Simrad NX40,Icom M603(VHF)+M802(SSB)



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.06 - https://www.webwizforums.com
Copyright ©2001-2023 Web Wiz Ltd. - https://www.webwiz.net