Fuse for “pump with hose”
Printed From: myHanse.com
Category: Hints & Tips
Forum Name: 575/588
Forum Description: 575/588 Hints, Tips and News
URL: https://www.myhanse.com/forum_posts.asp?TID=12458
Printed Date: 27 March 2026 at 03:47
Software Version: Web Wiz Forums 12.06 - https://www.webwizforums.com
Topic: Fuse for “pump with hose”
Posted By: Relentless
Subject: Fuse for “pump with hose”
Date Posted: 08 January 2021 at 13:40
|
On my boat, this pump turns on with F3 button. I was using it, and then I think I blew the fuse. The F3 light flashes now and I cannot find the fuse location. Any help?? Thanks!! |
Replies:
Posted By: Wayne's World
Date Posted: 08 January 2021 at 16:56
|
Rob, The fuse is 30amp and is on the outboard end of the We panel. PM me your email and I will send you the PDF showing the fuses on this panel.
------------- Wayne W Cruising, currently in the Pacific until the end of 2026. |
Posted By: Relentless
Date Posted: 08 January 2021 at 19:39
|
thanks Wayne!! Yep! I see it now after reading your message and taking a closer look! It’s buried in the middle of the board! I had to move the wire bundle to see it! Thanks a million! Currently anchored in St Barts. Rob
|
Posted By: Black Diamond
Date Posted: 09 January 2021 at 01:51
|
Another reason to replace fuses with the "glow when blown" variants. MUCH easier to find and replace. I sent the WURTH 12V diagrams I have to your email account. Hope they help. ------------- Rick S/V Black Diamond Hanse 575 Build #192, Hull# 161 Newport, RI |
Posted By: Fendant
Date Posted: 09 January 2021 at 03:55
This is the reason why I have replaced all fuses by resettable ones. I once lost a fuse I had to change and it disappeared into the Würth panel and caused a short circuit on the PCB. This was a 1000€ silly mistake. ------------- Frank |
Posted By: marcopone
Date Posted: 02 February 2021 at 19:22
|
The F3 pump is also a problem. It has a rubber propeller who can not run dry. Besides if it stay off for a long time the propeller locks and the fuse blown. After having changed several fuses I took it out and replaced with a grey water pump. This can run dry without melting the propeller. I also took out the filter as this pump does not need one. The throuput is lower but you can rely on it when you need it.
|
Posted By: bopeddenmark
Date Posted: 28 April 2021 at 22:45
| Hi I have the same problem with a flashing F3. It will help me if you anyone could tell me where the 30a fuse are situated. Thanks in advance. Bo |
Posted By: bopeddenmark
Date Posted: 28 April 2021 at 22:49
|
hi Rope. Could you sent me the PDF document for the F3 fuse My mail: bopeddenmark@gmail.com Thanks
|
Posted By: Wayne's World
Date Posted: 28 April 2021 at 23:15
|
Bo, Emailed you the PDF showing the fuse positions. ------------- Wayne W Cruising, currently in the Pacific until the end of 2026. |
Posted By: Black Diamond
Date Posted: 29 April 2021 at 00:45
|
X3.6. Its probably on page 2 on Wayne's PDF (as it is on mine). Strongly suggest you use "glow when blown" fuses so that its easier to locate and you only reference the doc rarely. Rick  ------------- Rick S/V Black Diamond Hanse 575 Build #192, Hull# 161 Newport, RI |
Posted By: bopeddenmark
Date Posted: 29 April 2021 at 07:20
|
Thank you so much. Vary useful I love this Forum
 |
Posted By: bopeddenmark
Date Posted: 29 April 2021 at 07:25
|
Thank you so much Black Diamond. Your comments and shares, are always appreciated. Regards Bo
|