415/418 - 415 control panel wiring

Print Page | Close Window

415 control panel wiring

Printed From: myHanse.com
Category: Hints & Tips
Forum Name: 415/418
Forum Description: 415/418 Hints, Tips and News
URL: https://www.myhanse.com/forum_posts.asp?TID=13364
Printed Date: 27 March 2026 at 03:30
Software Version: Web Wiz Forums 12.06 - https://www.webwizforums.com

Topic: 415 control panel wiring

Posted By: Sean
Subject: 415 control panel wiring
Date Posted: 01 May 2022 at 18:46

I need to add and AIS transponder to my Hanse 415. I would like to wire it to the same switch that turns on all instruments.

Down the line I will probably add more electronics using the unused function buttons on the right.

Is there any wiring diagrams or instructions available for this sort of thing?

Thanks

Sean

Replies:

Posted By: Fendant
Date Posted: 02 May 2022 at 08:49

Hi Sean,

please PM me your e-mail address

Frank

-------------
Frank

Posted By: 415 Singapore
Date Posted: 02 May 2022 at 09:20

Hi always worth checking the Diagrams and manuals section, not sure if this is what you need

https://www.myhanse.com/h415-fuse-wiring-diagrams_topic10084.html%20" rel="nofollow - https://www.myhanse.com/h415-fuse-wiring-diagrams_topic10084.html

All the best

Paul

-------------
Paul - Night Train - 415 #136

Posted By: S&J
Date Posted: 02 May 2022 at 12:14

My AIS transponder has been added behind the main switchboard and it not easy to get at while sailing.

As there may be times when I do NOT want to show my position I prefer to have it on a separate switch. Note that my transponder is not integrated into my other instruments and I use the B&G V60 VHF for receiving AIS.

Mine is currently on F5 (XB 5.6).

-------------
H458 #159 Primal Mediterranean cruising

Posted By: Matt1
Date Posted: 02 May 2022 at 12:35

I added mine to a spare F switch for the reasons Stuart says above. Plus, I have output the posn NMEA from it to an old Furuno Navtex which gives me GPS redundancy, but some have WiFi so could be seen on a tablet etc

-------------
Hanse 418 #64 EmBer. Hamble, UK

Posted By: Sean
Date Posted: 02 May 2022 at 15:05

Many thanks for all the replies. Plenty of reading material to look at.

I will consider putting the transponder on a separate switch as suggested.

Thanks all

Sean