Side openings
Printed From: myHanse.com
Category: Hints & Tips
Forum Name: 415/418
Forum Description: 415/418 Hints, Tips and News
URL: https://www.myhanse.com/forum_posts.asp?TID=14598
Printed Date: 27 March 2026 at 03:51
Software Version: Web Wiz Forums 12.06 - https://www.webwizforums.com
Topic: Side openings
Posted By: MikkelSchausen
Subject: Side openings
Date Posted: 30 April 2024 at 09:55
|
Hi all I just bought a 2021 Hanse 418. There is no openings in both sides of the hand rails. Anybody made that ? I have also asked Hanse if they have any original parts for changing. Thanks //Mikkel
|
Replies:
Posted By: 415 Singapore
Date Posted: 30 April 2024 at 10:18
|
Hi Mikkel On the 415, these were factory options so would think they were too on the 418. They are available from Boatoon but are called ‘Gates’. On the 415, Hanse put in all backing plates for any extras you might order as I guess that is simpler, so hopefully you already have the backing plates All the best Paul ------------- Paul - Night Train - 415 #136 |
Posted By: 415 Singapore
Date Posted: 30 April 2024 at 10:31
|
Stanchion Gates. SKU: TBR0935 on Boatoon ------------- Paul - Night Train - 415 #136 |
Posted By: MikkelSchausen
Date Posted: 30 April 2024 at 13:24
Thanks Paul  |
Posted By: MikkelSchausen
Date Posted: 21 May 2024 at 10:06
|
Hi Paul Just orderes the gate stanchions + fitting from Boatonn. Do you know if to's difficult to get "under the deck" to secure the foot for the stanchion ? Thx. //Mikkel
|
Posted By: 415 Singapore
Date Posted: 21 May 2024 at 11:53
|
Hi Mikell I don’t know, as we ordered Night Train with the side gates. But from my understanding Hanse use a standard mould that includes for all extras. One of the legs will fit over the current stanchion support, the backing plate and recess for the other leg should already be there. So hopefully you don’t need to get under the deck at all. Good luck Paul ------------- Paul - Night Train - 415 #136 |
Posted By: 415 Singapore
Date Posted: 21 May 2024 at 12:04
Hi, not very clear on this phot, but there are four shallow recesses in the deck molding for the gate legs.  this photo, but there are four shallow recesses in the deck molding for the gate legs. ------------- Paul - Night Train - 415 #136 |
Posted By: MikkelSchausen
Date Posted: 21 May 2024 at 13:08
|
Yes - I can see these. Only wondering if I needed to put a nut on the buttom. Or it's just enough to drill/screw into the prepared prework for the stanchions. Thanks a lot - really appriciated. |
Posted By: 415 Singapore
Date Posted: 21 May 2024 at 14:45
|
Hi, I would see if you can find the backing plate drawing. If the plate is where you need it, you could drill through it and ‘tap’ or form a thread in it to correspond with the threads on the attachment studs. Then it is simple to screw the studs down and slot the the gates over the studs. No need for a nut if the backing plate has been threaded, it acts as the nut. All the best Paul ------------- Paul - Night Train - 415 #136 |
Posted By: 415 Singapore
Date Posted: 21 May 2024 at 14:50
|
If you take off one of the stanchions you will get a better idea of how it goes together! ------------- Paul - Night Train - 415 #136 |
Posted By: MikkelSchausen
Date Posted: 12 June 2024 at 09:15
|
Hi Paul. Sorry to bother you again. Tried to get in contact with Hanse, to see if there was any drawings of the installed backplates. So I know before drill a hole in the glasfiber to see what's below ? :-). Do you have any drawings ? Thanks in advance //Mikkel
|
Posted By: 415 Singapore
Date Posted: 12 June 2024 at 09:28
If you search in the manuals and drawings area of this site you will find lots of useful stuff!
------------- Paul - Night Train - 415 #136 |
Posted By: MikkelSchausen
Date Posted: 13 June 2024 at 08:40
|
Paul - Thank you so much. Really apricated. Great help //Mikkel
|
Posted By: S&J
Date Posted: 13 June 2024 at 19:15
|
Just to confirm, there are no nuts on the studs for the stanchions or gates. They screw into the alloy plates in the deck. You will need to get these drilled and threaded appropriately. You can see the pushpit and their supporting plates from the void behind the aft cabin which might help. ------------- H458 #159 Primal Mediterranean cruising |
Posted By: MikkelSchausen
Date Posted: 28 June 2024 at 08:06
|
Hi Paul All fixed now, the stanchions is in place and everything seems perfect. Thanks SO much for your advice here - really appriciated. Thx. Mikkel
|
Posted By: Yeoey
Date Posted: 06 August 2024 at 07:38
|
Mikkel, I designed and had made up the side steps for Sea Rambler - very pleased with them. ------------- Peter Sea Rambler 415 # 137 |
Posted By: 415 Singapore
Date Posted: 07 August 2024 at 03:22
|
Hi Mikkel No problem, glad you got them sorted out All the best Paul ------------- Paul - Night Train - 415 #136 |