Print Page | Close Window

Rusty seawater Valve

Printed From: myHanse.com
Category: Hints & Tips
Forum Name: 505/508
Forum Description: 505/508 Hints, Tips and News
URL: https://www.myhanse.com/forum_posts.asp?TID=15208
Printed Date: 26 March 2026 at 23:38
Software Version: Web Wiz Forums 12.06 - https://www.webwizforums.com


Topic: Rusty seawater Valve
Posted By: tobo2
Subject: Rusty seawater Valve
Date Posted: 24 June 2025 at 18:50
Checking the SD oil I discovered a rusty handle on the seawater intake valve for our Yanmar. Is that something you should repair immediately or is it just the handle to be replaced? (s. pic)



Replies:
Posted By: d281johnson
Date Posted: 25 June 2025 at 14:34
That just looks like the handle is rusting. Main body seems OK. If you have any worries, use replace when you next lift out of the water. They are relatively inexpensive and easy to replace. I had an Hanse 400 for over 15 years and it was good after that time…


Posted By: Paul Worthy
Date Posted: 27 June 2025 at 08:11
Mine looks much worse that that looks like it's just the lever. These seacocks are now made out of very poor quality bronze in china. I'm looking to replace mine with a composite Trudesign one if I can as they seem more reliable



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.06 - https://www.webwizforums.com
Copyright ©2001-2023 Web Wiz Ltd. - https://www.webwiz.net