Washboard locking device
Printed From: myHanse.com
Category: Hints & Tips
Forum Name: 430
Forum Description: 430 Hints and Tips
URL: https://www.myhanse.com/forum_posts.asp?TID=15235
Printed Date: 26 March 2026 at 23:38
Software Version: Web Wiz Forums 12.06 - https://www.webwizforums.com
Topic: Washboard locking device
Posted By: Aussieangus
Subject: Washboard locking device
Date Posted: 03 July 2025 at 08:07
|
My 430e has 1 wash board and a hatch over the top with just a pin that drops through the edge of the hatch and a padlock goes through that to lock it from the outside only. Im going for Catagory 4 (offshore) certification which requires the washboard to be able to be locked into the hatch and opened and locked from inside and out. Has anyone been through this? If so what solution/ product did you use? ------------- Sydney Australia GODS COUNTRY |
Replies:
Posted By: Skebiat
Date Posted: 20 July 2025 at 04:44
|
Posted By: Skebiat
Date Posted: 20 July 2025 at 04:51
| Hi Angus - see pic above. I made these to meet cat 5. The latch pin slots into the same hole as the pin that you have. You access the latch by removing the access lid. The lanyards attaches to the inside grab handles. The washboards are marine ply - there's angled edge where they meet. 430e. |
Posted By: Aussieangus
Date Posted: 24 August 2025 at 06:21
|
THanks so much thats almost identical to what i came up with. ------------- Sydney Australia GODS COUNTRY |