Triton 2
Printed From: myHanse.com
Category: Hints & Tips
Forum Name: 311 / 312 / 315
Forum Description: 311 / 312 / 315 Hints and Tips
URL: https://www.myhanse.com/forum_posts.asp?TID=15250
Printed Date: 27 March 2026 at 03:41
Software Version: Web Wiz Forums 12.06 - https://www.webwizforums.com
Topic: Triton 2
Posted By: Sailor1705
Subject: Triton 2
Date Posted: 13 July 2025 at 15:51
|
I have recently had a Triton 2 fitted and a B&G ZEUS S. The Zeus can be powered down but I cannot find how to power down the Triton 2, Could this be a wiring problem or can it be done from the instruments? Would appreciate some help with this one,,,
|
Replies:
Posted By: Arcadia
Date Posted: 13 July 2025 at 16:18
|
I don’t believe the Triton 2 has a power off feature. It is usually controlled globally from your supply circuit. Unfortunately with this set up it will be all or none as far as active devices on the system. ------------- Leon / ARCADIA 2018 Hanse 588 Sag Harbor, NY |
Posted By: 32mike
Date Posted: 13 July 2025 at 17:34
|
I have two Zeus plotters and two Triton’s installed by the factory. All are powered through one nav switch on my Würth DC panel. The Zeus plotters have their own power on/off switch but the Triton’s just power on when the nav switch is turned on. ------------- Mike S/V Dulces Sueños 458 #087 Tampa, FL |
Posted By: Arcadia
Date Posted: 13 July 2025 at 18:32
|
The good news is that the Tritons are very low power consumers so no worries about energy use on your batteries. ------------- Leon / ARCADIA 2018 Hanse 588 Sag Harbor, NY |
Posted By: marsella
Date Posted: 13 July 2025 at 19:39
Indeed, I just checked that the Triton2 power consumption is only 1.4-1.8 Watts Compare with Zeus 3S 9" which uses 21W.
|