Print Page | Close Window

Measurements for Hanse 345 Self-tacking Headsaill

Printed From: myHanse.com
Category: Hints & Tips
Forum Name: 345/348
Forum Description: 345/348 Hints, Tips and News
URL: https://www.myhanse.com/forum_posts.asp?TID=15410
Printed Date: 27 March 2026 at 03:29
Software Version: Web Wiz Forums 12.06 - https://www.webwizforums.com


Topic: Measurements for Hanse 345 Self-tacking Headsaill
Posted By: SurfinSurgeon
Subject: Measurements for Hanse 345 Self-tacking Headsaill
Date Posted: 23 October 2025 at 23:05
Curious if anyone with Hanse 345 has measurements for self tacking headsail. I am measuring tomorrow morning and would like some reference numbers. Thanks in advance!

-------------
Tom N
S/v Take Five
Hanse 345



Replies:
Posted By: DCBay
Date Posted: 28 October 2025 at 12:49
Hi.  Bought new sails last year from North Sails.  The attached file gives I and J dimensions for a 105% jib.  I have a self tacker.  A little smaller.  I goes from 13.92m to 13.400m and J goes from 3.92m to 3.880m with self tacker.   uploads/8287/Hanse_34R_sail_and_deckplan.pdf" rel="nofollow - uploads/8287/Hanse_34R_sail_and_deckplan.pdf

Some more details from North Sails on self tacker.  Fit perfectly first time.


Posted By: Martin&Rene
Date Posted: 28 October 2025 at 14:43
That file is for a 341 not a 345 and I am sure there is a difference.  Note difference in LOA.

-------------
Martin&Rene Hanse 341 Dipper Wheel steering, 3 cabin layout, normally based in Scotland


Posted By: SurfinSurgeon
Date Posted: 28 October 2025 at 15:08
I noted that - although I think it is very close specs wise. Also it reinforces that my measurements are at least in the ballpark.

-------------
Tom N
S/v Take Five
Hanse 345


Posted By: SurfinSurgeon
Date Posted: 29 October 2025 at 00:29
If anyone looks at this thread these were the measurements based on the original Elvstom 95% self-tacking jib and the measurements of the headstay that I submitted to my sailmaker.  I will update later if the sail works out well:
A.   38.79 feet (head to feeder)
B.   42.13 feet (head to tack attachment ring on furler)
C.   43.04 feet to deck along headstay (top of furler surface is 42.46 feet) 

Luff:  42.13 feet
Leech: 38.63 feet
Foot: 11.13 feet (middle of clew board - 11.5 feet to farthest grommet on clew board)

Sorry for it being in feet.


-------------
Tom N
S/v Take Five
Hanse 345



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.06 - https://www.webwizforums.com
Copyright ©2001-2023 Web Wiz Ltd. - https://www.webwiz.net