Print Page | Close Window

Bow thruster retraction issue

Printed From: myHanse.com
Category: Hints & Tips
Forum Name: 545/548
Forum Description: 545/548 Hints, Tips and News
URL: https://www.myhanse.com/forum_posts.asp?TID=8463
Printed Date: 27 March 2026 at 01:44
Software Version: Web Wiz Forums 12.06 - https://www.webwizforums.com


Topic: Bow thruster retraction issue
Posted By: steven G
Subject: Bow thruster retraction issue
Date Posted: 23 June 2014 at 19:33
My 545 is out of the water I have lowered the bow thruster (RMC 18560 24v)
And it won't retract ? The shear pin is fine I have taken off the worm activator mech and tested
working fine ! Any ideas?



Replies:
Posted By: Awatea
Date Posted: 24 June 2014 at 16:57
There is a up/down sensor. I had similar problems last year and expected bad new. Just required new sensor.
Cheers
John



-------------
John



RANGATIRA   575. #82


Posted By: steven G
Date Posted: 24 June 2014 at 20:17
John thank you for your reply do you know where this sensor is located or is it in the control unit ?
Regards Steven


Posted By: Awatea
Date Posted: 25 June 2014 at 18:42
Hi Steven

I wasn't there when it was repaired. I expected an expensive repair and was pleasantly surprised.
I have a Max Power 150 VIP>
Sorry I cannot help with more info
Cheers
John


-------------
John



RANGATIRA   575. #82


Posted By: steven G
Date Posted: 10 July 2014 at 21:22
bow thruster sorted ! Big thanks to Lewmar tech dept excellent !
Sent me a new control box next day and all the advice required
for cause very impressive service .


Posted By: panos
Date Posted: 11 July 2014 at 20:27
The bow thruster electronics are crap. Throw them away! We did!

-------------
Panos

Hanse 630e - selling her -



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.06 - https://www.webwizforums.com
Copyright ©2001-2023 Web Wiz Ltd. - https://www.webwiz.net