Yanmar connection to Zeus

I believe that the ECU in the Yanmar has much more information including fuel flow rates.  The Yacht Devices gateway can be used on Yanmar with an adapter which they sell.  This is MUCH less expensive that the Yanmar option!

The Zeus can be configured to show the engine data but you'll need to check the manual to find out exactly what data it can show.  I'd be very surprised if it cannot display all engine data from standard PGNs.

To get the B&G to display this data you need to go through the "Data Sources" configuration and select the device that you want to use for the various sources.  In most cases you can ask it to auto-select and this will do it for you.

Once you have done that you can build custom displays containing any available data.  You have options to display this in an analogue dial format or just as a number.

I'll be trying it out in the spring.

you can go the expensive route and use a Volvo/Yanmar device or the economic solution with the Yacht Devices interface. With the latter you will (cuurently) only get fewer data. I am fine with these and have been really impressed by the technical support from Yacht Devices. Normally you get within hours competent response which works to your question.

MvG

Frank

I get all engine data on my Zeus/Triton including fuel consumption.

As mentioned I previously used the Yacht Devices engine gateway on a Volvo.  YD do make a converter for the Yanmar too.