|
| |
| Welcome to myHanse.com the forum for Hanse Yachts owners throughout the world. | |
Rudder dimensions Hanse 370e |
Post Reply 
|
| Author | |
GJBb 
Sub Lieutenant 
Joined: 15 July 2023 Location: Norway Status: Offline Points: 16 |
 Post Options
 Thanks(0)
 Quote Reply
 Topic: Rudder dimensions Hanse 370ePosted: 05 September 2024 at 08:45 |
|
I require the dimensions of the Hanse 370e rudder (2009) please.
My rudder has lost some length on contact with the hard . The repair yard needs this information Many thanks Greg
|
|
 |
|
|
Captain Cook
Admiral 
Joined: 23 May 2006 Location: Denmark Status: Offline Points: 1245 |
Post Options
Thanks(0)
Quote Reply
Posted: 05 September 2024 at 19:09 |
|
https://jefa.com/ftp/rudder/rudder_blade/RUD40.PDF https://hanse.boatoon.com/en/shop/article/27215/rudder-long |
|
|
Freya H400 #27 (2006),2-cabin, 40HP 3JH4E, 3-blade Flexofold, Aries LiftUp Windvane, Exturn 300, Jefa DD1,Simrad NX40,Icom M603(VHF)+M802(SSB)
|
|
|
|
|
GJBb
Sub Lieutenant
Joined: 15 July 2023 Location: Norway Status: Offline Points: 16 |
Post Options
Thanks(0)
Quote Reply
Posted: 05 September 2024 at 20:18 |
|
Thanks so much
Got what I want from your link Kind regards Greg
|
|
|
|
|
alettaenmarcel
Admiral
Joined: 15 August 2006 Location: Netherlands Status: Offline Points: 1246 |
Post Options
Thanks(0)
Quote Reply
Posted: 09 September 2024 at 18:02 |
 I see on the drawing a rudderstock from 98 mmThe 370 has a rudderstock from 88 mm Think there should be another drawing. I have done some work on my rudder last year. Edited by alettaenmarcel - 09 September 2024 at 18:08 |
|
|
Kids Dingys 72-79 ,Several Windsurfboards 79-86 OK dingy competitions 86-92 , Trotter Pandora Race 92-98, Friendship 28 Sport 98-05, Hanse 370 06-......
|
|
|
|
|
Captain Cook
Admiral
Joined: 23 May 2006 Location: Denmark Status: Offline Points: 1245 |
Post Options
Thanks(0)
Quote Reply
Posted: 09 September 2024 at 19:51 |
|
This is the specific drawing for replacement rudder RUD40 for Hanse 370+400. RUD40 is also sold for other boats with rudder stock up to ø98mm. The question was about the dimension of the rudder blade for repair purposes. The RUD40 for 370+400 has an alu-stock of 88mm in ALU6082. |
|
|
Freya H400 #27 (2006),2-cabin, 40HP 3JH4E, 3-blade Flexofold, Aries LiftUp Windvane, Exturn 300, Jefa DD1,Simrad NX40,Icom M603(VHF)+M802(SSB)
|
|
|
|
|
GJBb
Sub Lieutenant
Joined: 15 July 2023 Location: Norway Status: Offline Points: 16 |
Post Options
Thanks(0)
Quote Reply
Posted: 10 November 2024 at 08:31 |
|
Good morning Captain Cook
Many thanks for the info. My rudder has been repaired and fitted. Looks good and new lower bearing supplied by Jefa.the boatyard did not replace this damaged “circlip?” . Its internal diameter is 61mm, outer diameter about 67 mm and it is about 2mm thick Jefa no longer manufacture this part so i am going to try to get a new one made. Can i fit it without lowering the rudder ? I don't see any groove that it fits into ? Maybe it just loose? Is its purpose simply to create a spacer ? Thanks so much Greg |
|
|
|
|
GJBb
Sub Lieutenant
Joined: 15 July 2023 Location: Norway Status: Offline Points: 16 |
Post Options
Thanks(0)
Quote Reply
Posted: 10 November 2024 at 08:35 |
|
Thanks for the photo. You did a great job.
Many thanks for the info. My rudder has been repaired and fitted. Looks good and new lower bearing supplied by Jefa.the boatyard did not replace this damaged “circlip?” . Its internal diameter is 61mm, outer diameter about 67 mm and it is about 2mm thick Jefa no longer manufacture this part so i am going to try to get a new one made. Can i fit it without lowering the rudder ? I don't see any groove that it fits into ? Maybe it just loose? Is its purpose simply to create a spacer ? Thanks so much Greg |
|
|
|
|
Captain Cook
Admiral
Joined: 23 May 2006 Location: Denmark Status: Offline Points: 1245 |
Post Options
Thanks(0)
Quote Reply
Posted: 10 November 2024 at 09:55 |
|
Ask Jefa if it is necessary to fit a new circlip/spacer. There are a few posts about them which you may find using "advanced search-any date-spacer?). I am a little busy now so you will have to do the search yourself. I believe that the spacer is there to keep the rudder from touching the hull. My boat has no spacer, so maybe it is only mounted on boats where the rudder is very close to the hull. There are hundreds of posts about Jefa Rudder, e.g.: https://www.myhanse.com/342-rudder-removal-process-wheel-steering_topic13210_post108828.html?KW=Rudder#108828 :Kjeld |
|
|
Freya H400 #27 (2006),2-cabin, 40HP 3JH4E, 3-blade Flexofold, Aries LiftUp Windvane, Exturn 300, Jefa DD1,Simrad NX40,Icom M603(VHF)+M802(SSB)
|
|
|
|
|
GJBb
Sub Lieutenant
Joined: 15 July 2023 Location: Norway Status: Offline Points: 16 |
Post Options
Thanks(0)
Quote Reply
Posted: 10 November 2024 at 09:57 |
|
Thanks so much Captain .
Much appreciated Greg
|
|
|
|
|
Post Reply
|
|
| Tweet |
| Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
|
Links : www.hanseyachts.co.uk www.hanseyachts.com www.fjordboats.co.uk www.dehler.co.uk www.varianta.co.uk |
Topic Options