Seat Rear Pulpit

I have seen the same thing on other boats, but don't know if any You got this on a Hanse?

The comandering chief aboard has orded me to produce this.

I wonder if one can control the rudder from that seat, and also if it will get in the way during harbor maneuvering/mooring.

The outboard will get in the way with that location.

The brand NOA has made a quick solution:

/H8jer

It seems easy enough to make.  The most difficult part would be the attachment to the rail.  I've seen standard fittings that would seem to work, though.  What I would be worried about is the setup getting in the way of other things.   

If that's not an issue, then go for it.  

 locker.   Once I bored the hole,  just plugged the cable into the bridge. Pair it and you’re done.

I use it a lot when both the Admiral and I are on the bow getting things out of the sail locker.   Lots of lobster pots in our area.

Saw the initial post on my phone and needed my mac for a picture...

The location is in the lower right.   It shows "bluetooth" on the antenna.    You can see two things in the picture:

The bluetooth antenna goes in easy once you get over the trauma of cutting into the gelcoat.   As I said, there is a network bridge below it.   One warning.  You need a SIMNET to NMEA adapter (I believe) to connect the cable from the remote antenna to the bridge.   I got mine from Defender Marine, but my guess is they are readily available. 

A duplicate charging station for the VHF radio handheld.    There is a 12V outlet in the same area (but on the Fusion stereo side) and I used that for the power.  Works great.   One below.  One on deck. 

Hope this helps.