|
| |
| Welcome to myHanse.com the forum for Hanse Yachts owners throughout the world. | |
SIMARINE SPC220H Contro Panel |
Post Reply 
|
Page 123> |
| Author | |
Velamarco1959 
Sub Lieutenant 
Joined: 19 July 2007 Location: Italy Status: Offline Points: 10 |
 Post Options
 Thanks(0)
 Quote Reply
 Topic: SIMARINE SPC220H Contro PanelPosted: 17 February 2025 at 15:47 |
|
Hi everyone, I have a problem with the Simarine Panel. On my boat Hanse 460#129 are installed 6 LiFos lithium battery model LiFePo4 105 Ah. When the boat arrived from the shipyard the parameter of battery service panel weren't set and the battery display show 75% regardless of battery status. Can any other hanse owners with the same type of control panel and batteries help me?
"Betta" Hanse460
|
|
|
Marco
|
|
 |
|
|
jtjk
Sub Lieutenant
Joined: 17 February 2025 Location: Finland Status: Offline Points: 18 |
Post Options
Thanks(0)
Quote Reply
Posted: 18 February 2025 at 12:26 |
|
Hi,
As a new member of the forum I am just guessing, but can it be attached only to the starter battery or is there separate values for both banks? Br, Janne
|
|
|
|
|
ariette
Captain 
Joined: 12 August 2013 Location: med Status: Offline Points: 202 |
Post Options
Thanks(0)
Quote Reply
Posted: 20 February 2025 at 20:39 |
|
The Simarine panel doesn’t work with lithium. Mine shows 75% all the time too. The mastervolt panel is the one to use. I have another similar issue with batteries
I leave the Simarine panel on over winter so my concierge can use the transom. Solar power keeps the batteries in charge at around 80% but after a couple of weeks the blue sky system switches of the Simarine panel and puts what it can to sleep. Is this a feature of the system? Sentinel live data shows no problem with the batteries but the “deep sleep” feature seems to switch on regardless of battery health. Ideas?
|
|
|
|
|
ariette
Captain
Joined: 12 August 2013 Location: med Status: Offline Points: 202 |
Post Options
Thanks(0)
Quote Reply
Posted: 23 February 2025 at 07:57 |
|
Hi. To answer my own question above the dealer has now told me that after 2 weeks inactivity the boat puts itself into "deep sleep" to preserve battery life. To switch on the BluSky switch has to be activated. It would have been a good idea to put this feature in the manual.
|
|
|
|
|
akbulut
Sub Lieutenant
Joined: 26 February 2025 Location: Turkey Status: Offline Points: 2 |
Post Options
Thanks(0)
Quote Reply
Posted: 26 February 2025 at 13:30 |
|
Hi, you will need to install Simarine Shunt (SC303 or SC503) to show the battery % - SOC value (State of Charge) for lithium batteries, you will be also able to see charging or discharging amperage currents as well. (https://simarine.net/combo-shunts-sc303-and-sc503/)
Edited by akbulut - 26 February 2025 at 14:03 |
|
|
|
|
Sahinsair
Lieutenant Commander 
Joined: 14 January 2023 Location: Kaş Status: Offline Points: 68 |
Post Options
Thanks(0)
Quote Reply
Posted: 07 May 2025 at 22:13 |
|
I have installed also Extra shunt for Simarine. I Wonder why Hanse doesn't install this shunt. Simarine Pico is also not connected to the NMEA 2000 cables. So you cannot get some of the information from the boat. If you can connect the internet you can get all of the informations from away. This days Simarine has a new update. But it needs to install with computer. I am using #Vanemar in my boat. Vanemar is saying that after this update you can control all of the buttons from away as well.
|
|
|
Sailing Sufi
|
|
|
|
|
460AUS
Lieutenant 
Joined: 21 June 2024 Status: Offline Points: 46 |
Post Options
Thanks(0)
Quote Reply
Posted: 14 May 2025 at 06:13 |
|
Hi All,
On later 460's (mine is #209 Manuf end 11/24) they have 3 Simarine shunts fitted ex factory. Engine, House and Bow Thruster, and they can all be read from the main panel. It also connects to iPhone. I have not taken delivery yet but when I do I will see what the iPhone App has to offer, and will post it. Cheers J |
|
|
|
|
angorsan
Lieutenant
Joined: 13 December 2023 Location: Latvia Status: Offline Points: 46 |
Post Options
Thanks(0)
Quote Reply
Posted: 14 May 2025 at 09:46 |
|
Does anyone know if it is possible to transfer the Simarine data to the be available in Sentinel app?
WBR, A.G.
|
|
|
|
|
Ryantoleary
Sub Lieutenant
Joined: 02 July 2025 Location: Halifax, canada Status: Offline Points: 1 |
Post Options
Thanks(0)
Quote Reply
Posted: 02 July 2025 at 11:02 |
|
Hi there. I was wondering if you ever got this resolved? I took delivery of the Hanse 410 last September and have two lifos 200 Ah batteries but have same problem. They always show 75% on PICO panel. The dealer changed the settings to indicate the correct battery type but no change?
|
|
|
|
|
Darek
Sub Lieutenant
Joined: 16 January 2024 Location: Sweden Status: Offline Points: 18 |
Post Options
Thanks(0)
Quote Reply
Posted: 13 August 2025 at 16:32 |
|
I had the same problem with 75% and 6 lifos batteries. And now i still have the same problem with 3 liontron batteries, after Hanse replace the 6 once. Simarine Pico shows wrong information and apparently the reason is the missing specific Simarine shunt for lithium. Hanse should fix this in this or other way. I‘m also discussing it with my dealer.
|
|
|
Darek "Summertime" Hanse 460 #92
|
|
|
|
|
Post Reply
|
Page 123> |
| Tweet |
| Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
|
Links : www.hanseyachts.co.uk www.hanseyachts.com www.fjordboats.co.uk www.dehler.co.uk www.varianta.co.uk |
Topic Options