| |
| Welcome to myHanse.com the forum for Hanse Yachts owners throughout the world. | |
Companionway dampers |
Post Reply
|
Page 12> |
| Author | |
JonB
Rear Admiral
Joined: 21 September 2010 Location: Cowes Status: Offline Points: 504 |
Post Options
Thanks(0)
Quote Reply
Topic: Companionway dampersPosted: 28 November 2023 at 17:39 |
|
Hi Guys,
Very strange year didn't get out much. One of the dampers has seized it has the following information on it. STOBO - assume manufacturer 4004109 - assume part number 800N 03/07 - assume rating and date of manufacture Does anyone know of a replacement in the UK or Europe?
|
|
|
Jon B
470e http://www.norse-king.blogspot.co.uk |
|
![]() |
|
pdc78
Commander
Joined: 27 May 2016 Location: UK Status: Offline Points: 142 |
Post Options
Thanks(0)
Quote Reply
Posted: 29 November 2023 at 05:32 |
|
If a normal Web search doesn't show up a compatible strut, then I suggest you make some measurements. The key dimensions (in mm) are cylinder diameter, piston diameter, closed length and fully extended. You also need to note the end fitting thread size assuming you can unscrew the existing. 800N is the compression force in Newtons.
Stainless will be more expensive. The default will be Nitride treated steel. https://www.sgs-engineering.com/gas-struts# in the UK is a place to start your supplier search. Good luck. |
|
|
H345 #269
|
|
![]() |
|
Ggerrit
Captain
Joined: 19 June 2016 Location: Monnickendam Status: Offline Points: 163 |
Post Options
Thanks(0)
Quote Reply
Posted: 29 November 2023 at 06:46 |
|
H400 2008 2 cabin
|
|
![]() |
|
Wild
Vice Admiral
Joined: 18 March 2010 Location: Turkey-Greece Status: Offline Points: 937 |
Post Options
Thanks(0)
Quote Reply
Posted: 29 November 2023 at 13:45 |
Hello Jon I ordered then by “Hanse.boatoon.com”under search function parts number TIM0328 price 15 euro in price list . I pay them 22,50 in 03/2022 Edited by Wild - 29 November 2023 at 13:47 |
|
|
Wild and Wet
Belgium 545e#268 |
|
![]() |
|
JonB
Rear Admiral
Joined: 21 September 2010 Location: Cowes Status: Offline Points: 504 |
Post Options
Thanks(0)
Quote Reply
Posted: 30 November 2023 at 11:49 |
|
Thanks guys,
I've gone to Struts Depot in London to see what they have. Hanse.boatoon.com, doesn't seem to supply them any more and I've also a request with STOBO, see what they say - cheers
|
|
|
Jon B
470e http://www.norse-king.blogspot.co.uk |
|
![]() |
|
Jojo
Captain
Joined: 03 August 2022 Location: liljeholmen swe Status: Offline Points: 166 |
Post Options
Thanks(0)
Quote Reply
Posted: 01 December 2023 at 11:52 |
|
Hallo replace from other brands is available
But as always the steel rod when not stainless needs to have a clean once a month with a oil spayed cloth type 5-56 or similar The rod is otherwise rusted and seal is damaged Hope this helps Regards jonas
|
|
|
3 Cabin, Hanse 342, Deep draft, Tiller version.
|
|
![]() |
|
Wild
Vice Admiral
Joined: 18 March 2010 Location: Turkey-Greece Status: Offline Points: 937 |
Post Options
Thanks(0)
Quote Reply
Posted: 01 December 2023 at 12:59 |
![]() Hi Jon
The original and the replacement set delivered by Boatoon is from the German brand HAHN. Edited by Wild - 01 December 2023 at 13:02 |
|
|
Wild and Wet
Belgium 545e#268 |
|
![]() |
|
Wild
Vice Admiral
Joined: 18 March 2010 Location: Turkey-Greece Status: Offline Points: 937 |
Post Options
Thanks(0)
Quote Reply
Posted: 01 December 2023 at 13:05 |
|
|
|
Wild and Wet
Belgium 545e#268 |
|
![]() |
|
JonB
Rear Admiral
Joined: 21 September 2010 Location: Cowes Status: Offline Points: 504 |
Post Options
Thanks(0)
Quote Reply
Posted: 01 December 2023 at 13:32 |
|
Thanks Chaps,
Gas spring shop (USA), suggests that the cylinder of the gas strut is 345mm when mine only measures 255mm, so a bit wary of buying the wrong product despite it saying it is the direct replacement. I can't find that page on the Hahn web site do you have a link?
|
|
|
Jon B
470e http://www.norse-king.blogspot.co.uk |
|
![]() |
|
pdc78
Commander
Joined: 27 May 2016 Location: UK Status: Offline Points: 142 |
Post Options
Thanks(0)
Quote Reply
Posted: 01 December 2023 at 13:54 |
|
Jon
The link I sent you for sgs will get you stainless gas springs from a UK supplier in most of the sizes per Hahn. It was stainless tension springs that they could not supply. Regards Paul
|
|
|
H345 #269
|
|
![]() |
|
Post Reply
|
Page 12> |
| Tweet |
| Forum Jump | Forum Permissions ![]() You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
|
Links : www.hanseyachts.co.uk www.hanseyachts.com www.fjordboats.co.uk www.dehler.co.uk www.varianta.co.uk |