Wuerth DC-panel TEV0605

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   I am hoping that someone can advise me on the fresh water tank sensor not working on a Hanse 348. Does not read the fresh water tank level. The sensor is the 2 pin 180 ohm type which is connected to connector 6.1 (wasser1) on the dc panel. The service manual for the Weurth DC panel states:
"2 Coding Plug
The water level can be read over a 5-wire sensor or a 2 wire 3…180 ohm sensor. By default a 5-wire
sensor is assumed. If the 100% value of the 5-wire sensor of the connector will be reconnected to the
ground, is no longer the 5-wire sensor in use but the 2 wire 3... 180 ohm sensor. This accounts for both
water sensors, independently from each other. " - meaning short pins 1 and 5
But the DC panel on our Hanse is not a 5 pin, its a 6 pin (3x3)
does anyone know what pins to short on this type of DC panel layout?

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
ynotahanse Members Profile Send Private Message Find Members Posts Add to Buddy List Sub Lieutenant Joined: 12 September 2019 Location: Canada Status: Offline Points: 2	Post Options Post Reply Quote ynotahanse Report Post Thanks(0) Quote Reply Topic: Wuerth DC-panel TEV0605 Posted: 10 November 2025 at 21:27
	I am hoping that someone can advise me on the fresh water tank sensor not working on a Hanse 348. Does not read the fresh water tank level. The sensor is the 2 pin 180 ohm type which is connected to connector 6.1 (wasser1) on the dc panel. The service manual for the Weurth DC panel states: "2 Coding Plug The water level can be read over a 5-wire sensor or a 2 wire 3…180 ohm sensor. By default a 5-wire sensor is assumed. If the 100% value of the 5-wire sensor of the connector will be reconnected to the ground, is no longer the 5-wire sensor in use but the 2 wire 3... 180 ohm sensor. This accounts for both water sensors, independently from each other. " - meaning short pins 1 and 5 But the DC panel on our Hanse is not a 5 pin, its a 6 pin (3x3) does anyone know what pins to short on this type of DC panel layout?



Welcome to myHanse.com the forum for Hanse Yachts owners throughout the world.