new Hanse 360

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Hello- I am a new owner of the Hanse 360 that was just released this year and am finding a lot of quality issues with the boat systems, in particular substantial issues with the electrical and plumbing (head) where they were not installed correctly. I have hull #12 and am the first to have a 360 in the U.S. I wondered if there are any owners out there for hull #1-11 of this model and if you are also experiencing issues with any of the boat systems. 
Just a note, for anyone considering upgrading to the new 360 I would not recommend it based on the issues I am experiencing.  

Edited by Bvietor - 10 December 2024 at 16:23

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
Bvietor Members Profile Send Private Message Find Members Posts Add to Buddy List Sub Lieutenant Joined: 07 August 2019 Location: USA Status: Offline Points: 12	Post Options Post Reply Quote Bvietor Report Post Thanks(0) Quote Reply Topic: new Hanse 360 Posted: 10 December 2024 at 14:52
	Hello- I am a new owner of the Hanse 360 that was just released this year and am finding a lot of quality issues with the boat systems, in particular substantial issues with the electrical and plumbing (head) where they were not installed correctly. I have hull #12 and am the first to have a 360 in the U.S. I wondered if there are any owners out there for hull #1-11 of this model and if you are also experiencing issues with any of the boat systems. Just a note, for anyone considering upgrading to the new 360 I would not recommend it based on the issues I am experiencing. Edited by Bvietor - 10 December 2024 at 16:23

Jasmineflyer Members Profile Send Private Message Find Members Posts Add to Buddy List Sub Lieutenant Joined: 19 January 2025 Location: U.K. Status: Offline Points: 1	Post Options Post Reply Quote Jasmineflyer Report Post Thanks(0) Quote Reply Posted: 19 January 2025 at 19:29
	Hi…did you have any luck with this request….I’m taking a delivery of a 360 soon….cheers

Black Diamond Members Profile Send Private Message Find Members Posts Add to Buddy List Admiral Joined: 24 October 2015 Location: Newport, RI, US Status: Offline Points: 1275	Post Options Post Reply Quote Black Diamond Report Post Thanks(0) Quote Reply Posted: 19 January 2025 at 22:11
	It's good to reach out the way you are, and I hope you get answers from other owners of 360's. In the way of a comment, however, I just want to say that its normal for new boats to have teething issues for the first year/season. These are complex systems and when it comes to plumbing, electronics or rigging, its normal to have setup and break-in issues. On this front, just keep a running list going with your dealer and do NOT let them off the hook until each and every one is addressed to your satisfaction. In my case, I spent months trying to find a NMEA2000 issue with my electronics. It turns out that the installer at the factory jammed the connector in too hard and damaged it. Things like this happen and are easily fixed. That said, there is a difference between config or "screw tightening issues" and things just being installed wrong at the factory. Either way, keep Hanse and your dealer responsible.
	Rick S/V Black Diamond Hanse 575 Build #192, Hull# 161 Newport, RI



Welcome to myHanse.com the forum for Hanse Yachts owners throughout the world.